Chapter 6User Manual · Release 2026.2.0Updated 2026-07-155 min read

CRF review and Go-Live

On this page (4)

Before setting your study live we highly recommend to test all settings. While MaganaMed validates the functionality of our software, customers are responsible for validating the eCRFs they set up in the system.

In the following we summarize some tips for ensuring a smooth start of the recruiting phase.

  • Test EVERY step. It will take a little bit longer, but every error in the workflow will cause a lot of work and pressure once the study is live.
  • Create several test participants and test all features and settings. All participants created during the setup phase can be automatically deleted during the going-live process
  • Let colleagues test, too. The creator of the study very often is too deeply involved in the study workflow thus cannot spot inconsistencies reliably enough anymore.
  • Use the pdf version of forms for proof-reading. Even if the form will later only be used electronically, a printout is very often helpful to spot typos an other problems.
  • Don't just test the ideal path. Make "Mistakes" – try entering unexpected or even invalid data, try to break the workflow you designed. That way you are most likely to identify setup mistakes and situations you didn't think of.

Ideally, conduct your testing in the context of an eCRF validation plan.

Going live

Once everything is set up and tested it's time to go live. To set the study live go to set up → go live.

  • confirm by ticking the box that you really want to proceed and set the study live
  • choose if you want to delete or keep all existing participants of the setup phase (deletion of the participants cannot be undone)
  • Click: GO LIVE!

NOTE: You can only go live, if all billing information is completed and all booked modules are activated by MaganaMed. Please contact the team of MaganaMed for further information: support@maganamed.com

Going live has several consequences to your study:

  • Every step is automatically tracked in the audit trail, which cannot be edited or deleted
  • The setup options get hidden (can still be accessed by clicking on setup)

After going live, the button will change to "Lock study". Use this button at the end of your study, to freeze all data and stop the payment period. All data will be "read-only" but can still be exported.

Changes after Go-Live

Making changes to the CRF after go-live is possible but must be done with great care in order to prevent problems or inconsistencies. The system will impose some restrictions on changes to prevent accidental edits and we recommend to follow re recommendations in this section.

Changing forms

Changing the content of a form that is already being used is problematic and should be avoided except for very minor edits such as correcting simple typos that have no risk of changing the meaning of a question. It may be acceptable to add questions to a form because it does not affect previously entered data. However, you will have to make sure that study sites are informed that/if they are expected to add that data to forms they have already finished.

Furthermore, the system will refuse changes to forms that already carry signatures. If you really must edit such forms, you have to remove all signatures on that form in all visits before the system will allow edits.

This restriction can be deactivated under Setup > General > Regulatory but we strongly discourage doing that because it is most likely not compliant with GCP to do that. At the very least, make sure to document that decision well! But really: don't use it!

The recommended way to make any non-trivial changes to forms is to make the changes outside the live study and copy them into the live study after validation of the adapted or new form.

  1. Create your Edit-Environment:

    • Create a new study.

    • Copy the form you want to change to the new study.

      – OR –

    • Contact support to make full copy your live-study (without data).

    • In the copy, Make a copy of the form you wish to change.

  2. Rename the copy of your form to clearly indicate that it is a newer version. E.g. "Demographics v2.0" or similar.

  3. Make the intended changes to the new version of the form.

  4. Test and review your copy in the preview.

  5. Add the changed form to the appropriate visits.

  6. Remove the old version of the form from the appropriate visits.

  7. Validate the new form with test-participants.

Once validation of the new form has finished:

  1. Copy the new form from the edit-study to the live study.
  2. Rename the old version of the form appropriately (e.g. "Demographics v1.0").
  3. Remove the old version of the form from the appropriate visits. We recommend not to "delete" the old form. Any data that was entered into the form before being unlinked from the visits will, of course, remain in the database.
  4. Add the new form to the appropriate visits. If necessary, adapt visibility rules and computed fields that use data from the new form version.

Closing the study

After the last participant has finished the study and is fully documented, there are usually a few things to finish before the study can be closed:

  • Closing remaining queries
  • Remaining monitoring activities
  • Signing forms
  • Exporting all data
  • ...

When all of these activities are done, it is time to close the study. To do so, click to Go-Live > Lock study and confirm that you want to loch the entire study. After locking, the study is read-only, i.e. you can still view all data an export it but you can no longer edit participants or data, edit queries, sign, add verifications etc.

Caution: Once locked, you cannot unlock the study anymore, so make sure you do that only when you are 100% sure everything is final and no further editing is required.

Locking the study is important, to document that it is finished – for your own documentation but also to tell the system, that the study is no longer active and has ended within the booked period of time.

Questions about Magana Trial Manager?

Try setting up your own eCRF in a free test account, or reach out to our team in Regensburg — we usually reply within one business day.