Chapter 10User Manual · Release 2026.2.0Updated 2026-07-158 min read

Entering and Managing Data

On this page (15)

Data is typically entered by a user (e.g. the study nurse), who is logged into the system or directly by the participant with the survey or eDiary function.

All data that is entered into the forms of your eCRF will be saved to the database automatically, without the need to explicitly click a save button. However, each form has a finish button at the bottom. By pressing that button you indicate that you have entered all data into the form and it can be considered complete.

At the very top of the data entry page, you will find a row of text that indicates your exact position in the study. It contains

  • Participant ID
  • Visit name
  • Form name

separated by > characters.

Many studies have multiple forms per visit and it can become cumbersome to enter each form of a visit separately for data entry. In order to make the data documentation easier, each form has a button Finish and Next at the end. Pressing that button will finish the form and automatically enter the next form. If you press this button in the last form of a visit, a dialog will pop up asking you if you really want to continue to the next visit. This is intended to prevent site users to accidentally enter data into future visits.

Data entry by site personnel

You can open a form of a participant by selecting the participant from the participant list and clicking the open button in the respective visit. As a shortcut, you can also find the desired visit and form of your participant directly in the participant list and click on one of the round check mark symbols in the list.

When entering a form, you will see a navigation bar on the left side of your window and the form on the right. The navigation bar allows efficient navigation between different forms, visits and even participants without having to go back to the participant view. The navbar will remember it position as long as you do not leave this data entry mode and simply move between forms and visits.

Changing data

As long as a form has not been finished, you can freely edit data. However, after clicking finish, any subsequent data entry or change requires justification. I.e. upon changing data, a dialogue will automatically pop up asking you to select a reason for change from a preconfigure list. In addition, you can also enter a free form comment in a comment field.

This feature can be deactivated by the study owner.

Data entry by study participants (Surveys/Diaries)

In some studies, participants are expected to enter (some) data themselves in participants surveys (ePRO, eCOA, etc) or Diaries. Forms intended for the participant are located in special visits that are marked as survey or diary in the participant view. Site personnel has access to these forms and can fill them in on behalf of the participant if necessary. However, the normal use of these visits is to send a survey invitation to the participants who will then complete the form(s) – typically on their own device.

Survey invitations can be sent in several ways and study administrators will configure the study accordingly (see section Surveys and Diaries). In some scenarios, site personnel is expected to manually send survey invitations.

Manual email invitation

One way of doing that is to select Send Email in the Participant login box of the participant view:

  • Select the correct visit you want to send an invitation to
  • enter the participant's email address in to the To field
  • Optional: edit the message (typically not desired)
  • Click Send

Create printout for later use

Another method is creating and printing a document that contains the survey link for your participant and/or a corresponding QR code. If the study administrator has configured a suitable print template, site users can create such document by selecting Print. A preview of the page will pop up. Select the desired printer and click Print.

Give the printout to the participant and give instructions on when and how to open that link.

Quick QR-code access

In some situations, you want the participant to fill in the form now while he/she is present at the site. To do that, you can select QR Login in the Participant login field. A QR-code will be shown. Scan the QR code with a smartphone or tablet and follow the link. Hand the device to the participant for data collection.

The QR code on the computer screen will close automatically after a while, but you can also close it manually.

eDiaries work the same way but participants can use the "+" icon to add new form copies as needed (e.g. daily).

Retracting the finished state

By clicking Finish at the end of a form, the person entering data indicates that they have completed data entry for this form. The green status indicator signals to colleagues and monitors that the form is complete and ready for signing/locking/review. If you finished a form accidentally, you can revert its status by selecting Mark as unfinished in the context menu of the form in the participant view.

Locking and unlocking forms

Depending on the auto-lock settings, the form might get locked directly after completion. If manual locking of the form is required/set, go to recruiting → participants and enter the participant screen via clicking on the respective participant. Select the respected form by clicking on the three dots next to the form and select "lock".

You can only lock and unlock forms with the respective permissions.

Signing forms

To sign a form go to recruiting > participants and enter the participant screen via clicking on the respective participant. Select the respected form by clicking on the three dots next to the form and select sign.

To verify your identity you will have to enter your email address and your password again. To be compliant with applicable regulations, this step is required for each signature.

If you have the required permission, you can also lock the form at the same time by selecting the respective option.

Signing a form requires that the respective user has a role with signing permissions. The meaning of the signature (e.g. approval) is clearly indicated in the signature dialogue and can be configured by study admins (Setup > General > Regulatory).

Verifying Forms

Monitors and other users with Verify permission can add and remove verifications from a form, an enter visit or participant. A typical example is Source Data Verification (SDV). To add a verification, open a participant and open the context menu of a form, visit or all visits and choose Verify. Select the desired verification type form the drop-down menu and click Verify. A double checkmark next to the form(s) will now indicate the presence of a verification. You can see the type of the verification(s) set by hovering the mouse pointer over the checkmark.

In order to see all details of the verification click Verification from the main menu.

Set verifications are also shown at the top of the participant form, including the type of verification, timestamp and user name:

Magana Trial Manager: Verifying Forms — verification indicator

User with Verify permission can remove verifications by clicking remove. Verifications will be removed automatically if the data in the form is altered. Therefore, we recommend locking each form immediately after verification.

Additional verification types can be configured by study administrators (*Setup

General > Monitoring*).

Creating a PDF of form data

You can create a PDF representation of filled participant form(s) by selecting PDF from the context menu of a form, visit or all visits. If desired, you can select to also include meta data such as Audit trail, verifications and signatures.

Biosample management

Biosamples (e.g. serum, tissue, CSF) can be assigned to patients at the time point of collection in order to clearly link one or more samples to one patient.

You can access the biosample handling via recruiting > biosamples.

Biosample inventory

In the inventory all generated sample IDs are listed. Additionally, all available information on each sample like type, date of packing, tubes, the actual status of life cycle and a link to the assigned participant can be found in this section.

Packing of biosamples

If configured that way, before a sample ID can be assigned to a participant, the tubes have to be packed and registered in the system. This can only be done by staff with the permission "biosamples".

To access packing go to recruiting → biosamples → packing.

To pack a sample set, scan the created barcode or type in the generated ID of the respective sample set.

Note: Only generated IDs listed in the inventory can be used.

If the tubes have their own identifiers and this was selected during setup of the tubes, you can scan or type in the respective identifier in the subsequent steps.

Click save or press enter to mark the sample set as packed.

The packed sample sets can now be used in the study.

Using biosamples in the study

The workflow of biosample usage is aligned with the physical handling process of biosamples. Thus, using biosamples consists of following steps:

  • open the respective patient in the trial manager (recruiting → participants → participant number)
  • click in "add" in the section "Biosamples"
  • take the sample set which you are going to use for this participant and scan (or type in) the identifier of the sample set ID (2D barcode on the sample set)
  • click "add"

The biosample set is now assigned to the patient.

You can add further sample sets to the same patient if needed by following the same steps.

Biosample life cycle

The sample life cycle can be viewed and edited at two different places in the software:

  1. recruiting → participants → select participant → biosample
  2. recruiting → biosamples → inventory → column: life cycle

In order to view past status, just hover over the clock symbol next to the actual life cycle status. To change the status, click on the actual status and select from the drop down list (to set available status see point 3.1.2.4).

Source Data Verification (SDV) on question level

You can add SDV indicators to individual questions in the context menu of the question. However, this is only for your own reference. The systems verification list will only show verifications on form-level. So you need to indicate the verification in the form-context menu after verifying the individual questions.

SDV is indicated by a green doubletick symbol next to the question.

Questions about Magana Trial Manager?

Try setting up your own eCRF in a free test account, or reach out to our team in Regensburg — we usually reply within one business day.